Sýnir færslur með efnisorðinu Randolph. Sýna allar færslur
Sýnir færslur með efnisorðinu Randolph. Sýna allar færslur

miðvikudagur, 19. ágúst 2015

Wordless Wednesday #102


Read More..

miðvikudagur, 15. júlí 2015

Wordless Wednesday #98


Read More..

miðvikudagur, 1. apríl 2015

Wordless Wednesday #88


Read More..

miðvikudagur, 31. desember 2014

Wordless Wednesday #76 - Last One in 2014 - Here's to a Great 2015!


Read More..

sunnudagur, 14. desember 2014

More gap filling

In between working on my chemical tank car model I made good progress filling in the gaps in scenery.  I also got a lot of the foam carved to the basic landform shape. This isn't as messy as plaster, but it generates a lot of styrofoam "chips" - if you're going to use foam for your scenery have a shop van handy and be prepared to give it a workout! You can see how I used the green florist foam to fill the gaps between the pink foam sections. The florist foam compresses easily enough to really fill those gaps. 
Next step is some paint and basic ground texture - that and the addition of some trees and this portion of the railroad will start to look "finished."
In the meantime I'm going to take a break - my arms and wrist are really sore�.



Read More..

fimmtudagur, 11. desember 2014

Filling in the gaps

I had several large pieces of pink foam board and some florist foam taking up room in the workshop. So instead of tripping over them I went ahead and filled in some of the gaps between the plywood sub roadbed and backdrop and fascia, mostly around Randolph. 
I'll do some carving and terrain forming tomorrow. The pink and green landscape doesn't look like much, but it's better than the big gaps that used to be there. 

Read More..

þriðjudagur, 9. desember 2014

What's been happening - Wiring, new car, new automobile, and a firehouse....

I've been getting some wiring completed on the Richmond side of the peninsula (and wiring makes for compelling photographs, which is why you haven't seen many posts this week!). I'm also putting some finishing touches on the Resin Car Works chemical tank car - will do a separate post on it in the next few days here and on the freight car blog.
The other big project this week had nothing to do with model railroading - my 10-year old car picked last Thursday to develop a bad leak in several key places...
Without going into too much detail, it was going to cost more than the car was worth (by a factor of 2x!) to repair it so I ended up shopping for a new car. Not my favorite thing to do....
All that is behind me though.
An ongoing project (something I can do in front of the television) is researching the various structures needed for the railroad. At this point I'm trying to locate photos of the Randolph Vermont fire house (currently the town museum) - the building with a tower just north of the depot. Specifically, I'm looking for photos that show the door/window arrangements on the side and gable walls as they looked in the 1940s/50s - I believe at one point it may have had large "firehouse" style doors that have been replaced but the contemporary building doesn't make the arrangement obvious. After studying it for a while David Emery feels the building as it now stands is pretty much original - or at least relatively unchanged from my modeling era.
Hoping someone took a photo of a train and got more of the building in the foreground or background than I've found to date.
If I can't find that, we'll go with the current arrangement. The firehouse, and the coal and ice dealer from last week's Wordless Wednesday, will be key elements in the Randolph scene.
Read More..

miðvikudagur, 3. desember 2014

Wordless Wednesday #72


Read More..

föstudagur, 9. maí 2014

Randolph station

Shot of the model, almost completed:
Read More..

miðvikudagur, 16. apríl 2014

Wordless Wednesday #43


Read More..

miðvikudagur, 9. apríl 2014

Wordless Wednesday #42


Read More..

föstudagur, 14. mars 2014

Randolph "Signature" Structures


Although the blog has been fairly quiet for the last two weeks, I have been (slowly) making progress on getting the track in place in Randolph. At some point the track will be down, wired, and working and I can run trains again! In the meantime, here are some of the key structures in Randolph that I want to include on the layout.
First and foremost is the station area �
George Dimond photo, courtesy Central Vermont Railway Historical Society Collection.
Perhaps one of the best know structures in Randolph among CV fans and modelers, the Randolph Coal and Ice building, which at the time I'm modeling was the R. B. Osha Co.  
And the old firehouse, which is today the town museum:
These are the few of the �signature� elements� I want to include in my Randolph scene. There are some others which I'll share in future posts. �Stay tuned� for more details as I address modeling each of them. In the meantime, I�ll get back to tracklaying�
Read More..

miðvikudagur, 26. febrúar 2014

Wordless Wednesday #36


Read More..

miðvikudagur, 19. febrúar 2014

Progress in Randolph


Making progress on the subroadbed for the Randolph area. At this point, the new 1 x 4 grid benchwork is completed and the plywood subroadbed has been installed on the north end of Randolph. Station will be located where the bottle of yellow glue is sitting in the top photo. Still need to jigsaw the plywood and install risers for the south end of Randolph. My goal for this week is to get the cork roadbed in place and perhaps get a start on the track and wiring.

Read More..

miðvikudagur, 12. febrúar 2014

Wordless Wednesday #35


Read More..

laugardagur, 1. febrúar 2014

Laying out Randolph

Laying out the Randolph track arrangement. In this photo, the under construction Waterbury station is serving as a stand in for Randolph. 
Been working on converting the prototype track arrangement at Randolph onto the layout. I'm doing this "full size" using actual track components, or xerox copies, and cut outs of buildings. I pinned a large piece of plain white poster paper to the layout surface so I could sketch out ideas, and make changes. Eventually that piece of paper will serve as the template for cutting out the sub roadbed. 
A key signature scene for Randolph is in this aerial view. I think I can take liberties with the prototype (such as bending the track the "wrong way," curving tangent track etc�..) as long as I get this "downtown" scene fairly accurate. 

Aerial view of the depot area in Randolph. The station is in the upper right hand corner, which means this photo is oriented with my backdrop side on the bottom and fascia side on top. Randolph Coal and Ice (lower left) and the firehouse (with the peaked-roof tower) are also signature structures for this scene. 

Read More..

miðvikudagur, 29. janúar 2014

Wordless Wednesday #33


Read More..

föstudagur, 24. janúar 2014

Randolph Industries

This table shows a list of the trackside industries in Randolph from around the time frame of the layout. I say "around" the time frame since this information is taken from a CV List of Industries - dated December 1945 (Original provided by the late Jim McFarlane).
Of note to my crew members familiar with the layout is the addition of another Demeritt Co. Cannery (there's already one in Waterbury - I wonder how many misrouted cars will result from having two industries with the same name!) and the fact that there were two operating creameries in town at the time. Not unheard of, certainly but much of the model railroad literature published on milk train operations has usually emphasized two things - (1) creameries were on double-ended sidings and (2)there was only one creamery in any given town active at any given time. (Obviously, these were not always the case).



Read More..

Prototype Map - Randolph (First Draft)

To offer some context to the scene that will be replacing the paper mill scene I offer this very preliminary sketch of the prototype track arrangement and some of the other key elements in the Randolph scene from the time period I'm modeling. I'm drawing this in Adobe Illustrator using scans of track diagrams and the like from a variety of sources.
I place the "source" material in layers in Illustrator, resize them until they are in scale relative to one another, and then trace the outlines in Illustrator.This isn't precision work - the diagram shown here is actually sourced from four different railroad track maps and two Sanborn Maps. Getting them perfectly aligned with one another is difficult at best. Luckily, it's not really necessary to do so.
Of course I don't have the length available to exactly duplicate this in HO scale on my layout. So why bother with the prototype map at all? (I've done them for all the other towns on the layout).
Eventually the "notes" layer, not shown here, will be filled with everything from thumbnail photos of the prototype buildings to various notes and comments on types of siding, years it was built and/or altered, interesting notes on who lived where....even a location of a particular tree if it somehow "makes" a prototype scene! In short, these maps centralize much of what I know about the scene in one place. That way, when it comes time to build the models I have an idea of where to look - or at the very least a place to start!
Once I get this information together, the next step will be to develop a track arrangement that will actually fit in place on the layout - most of that layout planning is not done on paper but instead is done full size with flextrack and paper cutouts of the various buildings I've deemed essential to capturing the look of the prototype.
Read More..

mánudagur, 20. janúar 2014

Work Session Report - 20 January 2014


The 1x 2 shows the approximate alignment of the revised mainline through what will now be known as "Randolph."
 Had a good time today making some changes to the layout. Thanks to Tom, Stic, Ben, and John Paganoni for their help. 
I'll prepare a follow-on post detailing the "whys," but I made two rather significant changes to the layout today. 
First, I decided to replace the freelanced paper mill scene with another CV prototype scene. Inspired by the paper mill on Paul Dolko's former B&M layout, the paper mill was interesting, but after a couple of years of playing around with different track arrangements,  buildings, etc� it never really came together. Main issue was such a large complex really didn't seem to fit with the theme of the CV in the 1950s in northern Vermont. 
So, instead I'm going to add my version of Randolph, Vt, another favorite CV town. 
To add Randolph we need to have a longer town scene than was available, which meant the Williams Creek bridge scene had to be removed. It will be reinstalled in another location on the layout - here it is after Tom and Stic got done with it -
Ben and I removed the track from the paper mill scene and removed a fair amount of the foam board sub roadbed and framework from the section. Then Ben turned his attention to some of the passenger cars. An ongoing project is getting the Ambassador consist off the "bad order" shelf�.
Stic and I got the risers and crosspieces level in preparation for reinstalling the sub roadbed. By the end of the day, Randolph was down to the bare grid benchwork, but rebuilding will commence shortly. 
I also decided to move the end of the peninsula over about 20" or so, mostly to create a little more room to get around the relatively tight aisle between the back of the peninsula and north end staging. To do this we simply cut the peninsula at it's base - I should say Tom cut the peninsula using a very fancy saw that made truly straight square cuts, and all of muscled the peninsula into it's new position. Tom, John, and I then filled in the gap in the layout frame and backdrop. 
All in all a good day - thanks to all for the help. Next time I promise the work session will be a LOT more low key and not involve quite so many power tools!


Read More..