fimmtudagur, 24. október 2013
Building Waterbury 2: Feed Mill - Walls and window openings
 |
This view shows the street side wall of the building and the addition that was on the rear of the structure. |
 |
Since the model was originally built for a narrow shelf layout I never bothered adding clapboard to the wall away from the tracks. In fact, this was all that was visible, so it's all I modeled. This time the building can be viewed (from a distance) from the other side of the peninsula so I needed to add clapboards and the rest of the addition to this side. |
 |
At this point I've added the new walls to the street side of the building. The angled wall was originally used to accommodate a siding that once wrapped around this side of the building. By my era the track was no longer in use. NOTE: For this photo the building has been moved from it's planned location on the layout. |
Since this building was started well before I began this blog, I don't have photos of the earliest stages of construction. Basically, I built an inner shell of plain styrene (usually .030" or .040"). After locating the window and door openings, I used the well known scribe and snap method to create the window and door openings. After the sub walls were reassembled, I applied the outer layer of Evergreen .040" scribed clapboard siding. Once that's dried, I cut the window and door openings in the clapboard from the back (using the openings in the subwall as a guide).
Next steps on this building....foundation and roofs.....
??
?
??
?
miðvikudagur, 23. október 2013
mánudagur, 21. október 2013
Bulding Waterbury - 1: Intro
What�s the best part of a large layout? The variety � you can work on anything from benchwork to scenery to wiring as interest dictates. What�s the worst part of a large layout? The variety � you can work on anything from benchwork to scenery to wiring as interest dictates.
The problem of course, is while you get a lot of variety you can really only do one thing at a time. Too many things half-done means nothing looks finished. Potential large layout builders heed my words � the lack of focus caused by having too many things started and nothing finished has killed off lots of large layouts and is nothing to sneeze at!
Enough editorializing.
In an effort to overcome the �everything started nothing finished� syndrome I�ve decided to focus my attention on the structures in and around Waterbury. Why? Well, several of them are �half-started� and I have the information necessary for most of them. Perhaps most important Waterbury is the first scene you see when you come down the stairs into the layout area. Finally, this Phil Hasting�s photo of Waterbury is the one image that got me started modeling the CV of the steam era.
We�ll get started with the feed mill visible to the right in this photo. Here's what the same feed mill looked like the first time I saw it (sometime in the late 1980s, as I recall).
miðvikudagur, 16. október 2013
þriðjudagur, 15. október 2013
MER Convention Op Session - A couple of photos
Here's the WRJ Assistant YM, Joe Calderone during a break in the action at White River Junction. That yard is entirely too empty and he looks far too relaxed and smiling ..... we'll have to do something about that next time he visits.
A northbound extra through freight (behind a CN F7) runs through a crowded Everett as the Mill Turn works the town.
mánudagur, 14. október 2013
MER Open House and Layout Status Report
 |
| Running at track speed north of Williams Creek. |
 |
| Everett in all of its mocked-up glory.... |
Of course, the weeks prior to the convention open houses were spent mostly in the basement getting the layout ready. As anyone who has hd their layout on a tour can attest, often times more progress is made in the month before the open house than the six months before!
 |
| Current state of the "front door." It's getting there - many structures to scratchbuild. Completing this scene is very high on the agenda for the winter! |
I started with a long list of things I'd like to get done - I'd say I managed to finish about 75% of them. I wanted the trains to run fairly reliably, and for the most part succeeded. For my part I made a real effort to get rid of all the visible foam, plaster and plywood by covering it with a coat of earth-colored latex paint. I also got a fair amount of track painted and ballasted. It's amazing how much those two simple things blended everything on the railroad together.
While I wanted to get the "Foreign road" power we've been operating replaced with CV/SNE/CN etc... power I wasn't quite as successful at that!
We did have issues with some recently ballasted track - and one particularly troublesome set of Proto 2000 FAs. All these issues were fixed "on the fly" during the open house. I'm more than a little thrilled to report that we had zero issues with the wireless throttles over two days of almost constant running.
 |
| The "back aisle" had been raw plaster, plywood, and pink foam the week before the open house. Some paint, ground foam, and some extra trees made it look presentable if not "Finished." |
My crew (Stic Harris, Jeff McGuirk, Ben Hom, Norm Wolf and Bob Warren) did a great job. My parents manned the upstairs. Everyone seemed to have a great time. I didn't get any photos of people gawking at the layout, but here's a few pictures showing how the railroad looks today.
With the layout up and running it's time to turn my attention to some actual modeling projects. More on those to come in the weeks/months ahead.
 |
| "Yes, I know the station hangs over the edge of the benchwork!" Don't know how many times I had to say that! One thing we didn't get done was the alterations to the benchwork at Essex Junction that will accommodate the station. |
föstudagur, 11. október 2013
Gerast áskrifandi að:
Færslur (Atom)
